[Languagetext]
1=The default time setting %1 has an invalid value! Please enter each time slice in format 'HH:MM'.
2=You have entered less time slices %1. Please enter 8 time slices, each separated from another with the '#' character.

'Default Basal-rate insulin (german)
3=Aventis Lantus
4=Aventis Huminsulin Basal
5=Aventis Insuman Basal
6=Aventis Insuman comb
7=Novo Protaphan HM
8=Novo Semilente
9=Novo Monotard HM
10=Novo Ultratard HM
11=Novo Actraphane HM
12=Berlinsulin H Basal
13=Lilly Humaject Basal

'Default Bolus insulin  (german)
14=Lilly Humalog,3
15=Novo Novorapid,3
16=Aventis Huminsulin Normal,5
17=Berlinsulin H Normal,5
18=Novo Actrapid HM,5
19=Lilly Humaject Normal,5
20=Aventis Insuman Rapid,5

21=The insulin '%1' is not added to the selection box because it has an invalid effect profile of %2 hours (%3).
22=Cannot calculate interpolated A1c-value because there is no duration profile available for your selected rapid acting insulin.
23=Please enter a valid date (from) value, for the chart.
24=Please enter a valid date (until) value, for the chart.
25=Change time from %1 to current time (%2)?

'Main tabs
26=Profile
27=BG-Grid
28=Statist.
29=Diagnosis
30=Settings

'Profile-Screen
31=BG-Target
32=up to
33=Basalinsulin
34=Bolusinsulin
35=Carbs/insulin ratio
36=Breakfast
37=Lunch
38=Dinner
39=Correction
40=%1 per unit
41=Save
42=Insulin is inactive after %1 hours

'Bloodglucose grid edit tab
43=Urin-Ace.
44=Carbohy.
45=Bolus-un.
46=Basal-un.
47=Bpress.
48=Remark
49=S
50=Time

'Text used in profile tab
51=Profile of this insulin is not available.

'Pie-Chart-tab
52=Bef. Breakf.
53=Aft. Breakf.
54=Bef. Lunch
55=Aft. Lunch
56=Bef. Dinner
57=Aft. Dinner
58=Night only
59=Any time
60=2 Weeks
61=4 Weeks
62=6 Weeks
63=2 Months
64=3 Months
65=All values
66=From
67=till
68=A1C interpolation
69=Redraw
70=Low values
71=Target values
72=High values
73=X-high values
74=Must redraw!
75=Show blood glucose grid background in...
76=blue
77=colorized
78=Optimized edit positions in BG grid
79=Show edit line for Urin-Aceton
80=Show edit line for blood pressure
81=Update time slice when typing BG value
82=Default time slices
83=Click on ok closes SiDiary
84=>> SiDiary - for Windows, PPC && Smartphone <<
85=with kind support from
86=Lowest value:
87=Highest:
88=Number of values:
89=Average:
90=A1C:
91=CH/ins. ratio: %1
92=-> %1 units for meal %2 units correction
93=Bolusinsulin suggestion for %1
94=Show insulin suggestion 0...30 Sec.
95=Total %1 units
96=BG target: %1
97=No values!
98=If you select this option, all bg values will be recalculated from %1 to current unit %2. If you've entered values in current unit only, you can deactivate this option.
99=Recalculate bg level values
100=Please enter your personal coefficients for the dose of insulin (per g carbohydrate) and your correction rule (each x %1 blood glucose too high, needs to be corrected with 1 unit of insulin).
101=These coefficients have influence on the suggestion of bolus insulin which will be shown, when you've entered bg level and your meal!
102=Keep in mind that this is just a suggestion!! Think about the shown calculation and recalculate it if needed before injecting your bolus EVERY TIME!!!
103=If you want to get a bolus dose suggestion you have to agree with ok, that all of your injections are at your own risk!!! You need to setup your profile also!!!
104=You've activated the calculation and suggestion of your individual bolus dose of insulin.
105=am/pm
106=C
107=Language
108=Please select your language.
109=Bolus = (x BE * BE-ratio)
110=Update always
111=Weight
112=Total-Carbs:
113=Total-Bolus:
114=Total-Basal:
115=Total-Insulin:
116=-Total-Insulin/Bodyweight:
117=No weight entered
118=The A1c is just an approx. value!
119=Pie-chart
120=Dot graph
121=Statistics
122=Line graph
123=You can't delete insulin '%1' because it's actually selected in your profile!
124=Name of insulin
125=Acting duration of insulin
126=Saved types of insulin
127=Add
128=Edit
129=Delete
130=Close
131=Please enter a name.
132=Edit insulin types
133=Pills
134=Type1
135=Type2
136=You can't delete the pill '%1' because it's actually selected in your profile!
137=Name of pill
138=More settings
139=Graphics (%1)
140=Limits
141=Min.
142=Max.
143=Basal
144=Bolus
145=If you are using more than one type of insulin/pill for Basis/Bolus you can sign an application of second type with a *
146=I.e. if you enter 7* into Bolus inputbox this means that it were 7 units of the second bolus-type insulin/pill.
147=%1 will toggle each none numeric char at the end of a basal/bolus input into the *.
148=Insulin
149=Dynamic Y-axis
150=Show lines for BG target


'Additional messages/Captions for Win32-Client
500=PPC-Data-Folder
501=Close keeps application icon in systray
502=Tabs with Icons
503=&Print
504=&Export
505=Select a remark
506=Previous day
507=Next day
508=Previous week
509=Next week
510=Name
511=Blood glucose values...
512=...just sum for these times
513=Before Breakfast
514=After Breakfast
515=Before lunch
516=After lunch
517=Before dinner
518=After dinner
519=Night only
520=All values
521=Profile data
522=Daily overview
523=Statistic analysis of your blood glucose values
524=Diagnosis
525=Programsettings
526=About
527=Layout style
528=Please select from the list below or enter a new remark.
529=Save to list
530=Accept
531=Cancel
532=Select template
533=Delete listitem?
534=Please select a folder, enter a new one or cancel this form.
535=The entered folder does not exists. Create now?
536=&Ok
537=&Cancel
538=&Network childhood
539=Create new folder
540=Synchronizing %1 between Ce-Device and PC...
541=Some values were updated on the PocketPC device. You have to restart %1 on the PocketPC to see all changes!
542=The PPC-Data-Folder has to be specified for synchronization, if you're working with both versions at the same time. The Win32 uses another data folder which you don't have to specify. The Win32-Client will synchronize your data for both devices accurately!
543=Select day from calendar
544=Couldn't find DIABASS on your system. Please make sure that DIABASS is installed and configured properly so that SiDiary can read the DIABASS incoming folder.
545=Currently there is no DIBASS-patient selected. Please start DIABASS and select the patient you want SiDiary to export the data for.

'In this line only the short terms have to be translated NOT the placeholders enclosed with brackets!!!
'BG=BloodGlucose, BP=Bloodpressure, INS=Insulin, Meal=./., EX=Exercises, Weight=Weight, Lab=Laboratory
546=[DATUM] [UHRZEIT]   [VON]   BG:[BZ], BP:[BD], INS:[IN], MEAL:[MZ], EX:[SP], Weight:[KG], Lab:[LAB]

547=&Import
548=&Delete
549=The following DIABASS files can be imported into SiDiary
550=Do you really want to delete this import file? (It will be physically deleted so also DIABASS can't import this data any longer!)
551=Doubleclick or F4 opens calendar
552=Select template
553=The CSV-file could not be imported because of missing mandatory fields: %1The following fields can be used for the CSV-Import interface: %2
554=Executing Excel macro (%1)...


701=Monday
702=Tuesday
703=Wednesday
704=Thursday
705=Friday
706=Saturday
707=Sunday

801=January
802=February
803=March
804=April
805=May
806=June
807=July
808=August
809=September
810=October
811=November
812=December

900=English
901=Translated by Alf Windhorst
556=Uninstall
555=Documentation
557=Do you want to create one of the following shortcuts to the executable?
558=Create program group for %1
559=Autostart %1 minimized in systray on windows start
560=Total-insulin per day %1 units
561=New profile
562=There are unsaved changes. Do you want these changes to be saved?
563=&Save
564=Copy profile from
565=The profile will be deleted and can't be revived.
566=Management of basal-profile
567=Auto-update following sliders
568=Edit profile
569=Insert Basal-sum into diary for the following weekdays
570=You have assigned this profile to the weekday '%1' which has already an assignment to another profile. If you continue saving, the older assignment will be overwritten by this profile!
151=Insert system time
152=Save time input
153=Cancel time input
574=Type of pump
576=If activated, this basal profile will not be shown in the selection list of basal profiles.
571=CW - Change of catheter
573=CB - Change of battery
575=Temporary basal profile
578=%1: Delayed Bolus (%2)
579=Dualbolus
580=Delayed Bolus
581=Normal Bolus
582=Delay
572=CA - Change of ampoule
154=Pump
583=Compress columns
155=-Carbs/day:
156=-Bolus units/day:
157=-Basal units/day:
158=-Total insulin/day:
584=Off - Pump disconnected
585=On - Pump connected
586=The printout does not contain any advice for your therapy!
159=Calculated A1C:
160=Standard deviation:
161=Show in charts...
162=Standard deviation (%1)
163=Stdev:
164=Highest value:
166=Find
167=Producer
168=Type
169=%1 items
170=Searching...
171=Nutritions
172=Remark
173=Menu
174=Done
175=Navigation
176=Close %1
177=1 Day
178=1 Week
179=%1 hasn't changed much (%2 to %3)
180=%1 was improved from %2 to %3
181=%1 has become worse from %2 to %3
182=The level of %1 is: %2
183=excellent
184=good
186=poor
185=satisfactory
187=the frequency of bg level tracking
188=the A1C
189=the standard deviation
190=the postprandial level
191=on the previous level (fasting)
192= from %1 numbers
193=Could not find enough values for a valid assessment.
194=Other time range
195=Frequency of bg level tracking:
196=Postprandial levels:
197=Trend of therapy
198=The output of the diagnose tab does NOT contain any advice for your therapy and shall give you just a clue about the quality of your current condition! You should discuss these values with your doctor or healthcare-professional!
199=Settings
200=Lab test results
201=Target range
202=Saved laboratory test results
203=New laboratory test result
587=The following error ocurred while synchronizing data: %1
588=The check of the configured data folder raised the following error: %1%2The Smartphone sync was not activated!
589=Device name
590=Sync interval
591=seconds
204=Time range for analysis
165=Could not find nutrition database on your device. Please check www.SiDiary.org if you can download such a database for your country.
205=Refresh
206=Please select a lab test category from the list.
207=The lab value definition will be deleted and cannot be revived!
208=Unit
209=Please enter 2 continuing time ranges!
210=Trend
211=Time range %1
212=The arrow icons show the trend, how a category has changed from the first time range to the second range.
213=The smiley icons represent a rating of a category for the second (newer) interval.
214=The color of an arrow tells you about the quality of this category (green-good, red-bad), similar to the smiley icons.
215=You could encounter combinations of a down pointing arrow and a loughing smiley. This would mean that allthough the level of that category was decreased, it's still on a quite good level.
216=After running the analysis you can click on the icons to get more details.
217=above
218=below
219=Limit settings A
220=Limit settings B
221=Limit settings C
222=Rate my condition with the following limits...
223=Lab value definition
224=Please enter a valid date.
225=Date
226=Rating
227=Edit lab test result
228=Control times
229=Time range
230=Type of statistic
231=Blood Glucose Calculator
232=%1 from whole blood
233=%1 from blood plasma
234=Blood glucose
235=Number of hypoglycemia:
236=Diabetestype:
592=Delete column
593=Insert new column
594=Order by timestamps
595=Please notify me for this update later once again
596=I want to skip this update, notify me with the next one
597=My Email-Address (optional):
598=The following error ocurred while connecting to %1: %2Please be sure that your internet-connection is configured properly and working fine!
599=The list of all changes could not be downloaded: %1
600=Synchronizing %1 between Smartphone and PC...
601=Your search will produce a very long list (at least more than %1 hits). Continue searching?
602=Never search online for updates automatically (manually: More settings->Update-Check)
237=Fat
238=Protein
239=Portion
603=Check-Interval:
604=[Never]
605=The automatic online check for available updates couldn't be done for the last %1 days!%2Please start the update-check manually 'Settings->More Settings->Update-Check' and ensure that you are connected to the internet.
606=You are currently in offline mode or don't have a valid RAS connection.
607=Sync all changes of nutritions to the mobile devices?
608=Sorting
240=Carbs
241=New item
242=Edit item
243=This item cannot be deleted.
244=The item will be deleted and cannot be revived!%1
245=All nutritions, which are currently assigned to the item which you want to delete will then be assigned to '-' . All changes of nutrition data will also be saved!
609=Select all items for sync to mobile devices
610=Deselect all items for sync to mobile devices
611=Copying data to mobile devices...
612=On the mobile devices there are now %1 nutritions from %2 producers in %3 categories available.
613=Do you want to start now a RAS-connection for online update-checking?
614=Please do not forget to close your RAS-connection!
246=Exercise
247=Duration
248=Intensity
249=Reminder
250=Sport
251=Icon
615=The following error ourred while compressing files: %1
616=The following error ocurred while decompressing files: %1
617=Could not find the zip-libraries on your machine. The automated zip-/unzip functionalities can not be used.
618=One of the program files could not be found on your machine. Please ensure that the file (%1) is located in the folder where you have started 'SiDiary.exe'! (All needed application files are included with the downloaded zip archive and must be unzipped!)
619=SiDiary couldn't write data to the folder '%1'. The application cannot be started from read-only drives like CDROM and it needs write-access to save the data!
620=Program group
621=Print-Outs: Page break after Sunday
252=Number of val.:
253=You don't have any nutritions synchronized to your mobile device. Please start first the desktop version and select the nutrition records, which you want also use on your PPC or Smartphone.
750=This meter-driver needs SiDiary in version %1 or newer!
751=The %1 meter couldn't be found at any com port. Please be sure that the meter is connected properly and that it's switched on!
752=Please select the com port from the list or try the option for automatic search on all com ports.
753=%1 readings retrieved from the meter.
754=%1 invalid readings were ignored.
755=%1 new readings were added to the database.
756=%1 records were corrected in the database.
757=Receiving data from %1 at serial com port %2...
758=Checking serial com port #%1...
759=Serial com port #%1 is invalid.
760=The serial com port #%1 is already opened and locked by another application (i.e. a modem, fax or MsActiveSync).
761=Could not read any data from your meter at serial com port #%1. Please be sure that the meter is connected properly and that it's switched on! (Try also to switch off and reswitch on the meter)
762=Please connect the blood glucose meter to your desktop computer and ensure that your meter is switched on.
763=Automatic (SiDiary will scan all com ports for your meter)
764=Connect with the selected port only
765=&Import data
766=&Test import
767=Please select the com port from the list below or select the automatic scan of all com ports.
768=Import all readings from the meter
769=Import new readings only
770=Import
771=The import was canceled.
772=Import readings from blood glucose meter
622=Open
623=Terminate
773=%1 number of log book entries would be added on a real import.
774=%1 number of log book entries would be corrected on a real import.
624=Details

[MustReview]

[Version]
LangVer=4.0.358
